Electrical Transformer

SERVO VOLTAGE STABILIZER THREE PHASE

Servo Voltage Stabilizers detect the unexpected voltage fluctuations of the power supply and reduce or increase the voltage levels with the help of Servo Motors (an important component of servo stabilizers), and then provide a stabilized, high output voltage to the end devices.

To ensure better cooling of the Servo Voltage Stabilizers, natural air or transformer oil (IS:335) is used. Oil cooled Servo Voltage Stabilizers and Air-cooled Servo Voltage Stabilizers are the best solution for industry to avoid voltage fluctuation.

TECHNICAL SPECIFICATIONS
Standard	Confirms to latest IS:9815, IS:20266 relevant International Standard or as applicable
Capacity	10 KVA to 5000 KVA [Any Special Customised Capacity as per Customer Requirement]
Correction Method	Stepless Correction by SERVOKON make Copper Wound Variac [Dimmer]
Control Module	Microprocessor based Control Card with EDL Technology B ADMS Technology [Optional]
Classification	100% Unbalanced / Balanced Supply 8 100% Unbalanced / Balanced Loads
No. Of Phases	Three Phase
Frequency	50 / 60 Hz ± 5%
Mode of Control	Automatic / Manual
Load Variation	Admitted from 0 to 100%
Type of Installation	Indoor / Outdoor [As per customer requirement]
Cooling	Oil Natural Air Natural [ONAN] or Air Natural [AN]
Type of Oil	Transformer Oil as per IS:335
Output Voltage	380/400/415 V [± 1%] Phase to Phase
Input Voltage (Phase to Phase]*	150V-460V	250V-460V	280V-460V	300V-460V	340V-460V
Input Voltage (Phase to Neutral]*	90V-270V	140V-270V	160V-270V	170V-270V	200V-270V
	*(Any Special Customised Range as per Customer Requirement)
Duty Cycle/Life	Continuous 24 Hrs
Response Time	Less than 20 milliseconds
Correction Rate	10-60 V/Sec
Operating Temperature	-15°C to +50°C
Waveform Distortion	Nil [Negligible)
Efficiency	More than 96% [Approx.] or As per Indian Standards 8 International Standards as applicable
Mounting Arrangement	On Unidirectional Wheels